An application for the BOPP sticker BGC5057 includes product labeling, inventory control, and packing. This sticker has exceptional stickiness, is very strong, and delivers outstanding printing results.
weight | thickness | material | |
Face Material | 46±10%g/m2 ISO 536 | 0.050±10%mm ISO 534 | Biaxially oriented bright silver polypropylene film with special coating |
Liner | 58±10%g/m2 ISO 536 | 0.055±10%mm ISO 534 | White glassine treated with super calender |
Adhesive | A general permanent rubber adhesive. HF is an adhesive with a high initial viscosity. It has excellent performance on many packaging materials. It can be used for non-direct contact labeling of automatic labeling products such as food, supermarket refrigeration and electronic scales. | ||
Peel adhesion | initial adhesion 20N/25mm FTM 9 st.st | 20minutes Peel adhesion value on steel at 180° 18N/25mm FTM 1st.st | 20minutes Peel adhesion value on steel at 90° 12N/25mm FTM 2st.st |
Temperature | Min. Appl. Temp. -10ºC | Service Temp. -30ºC+65ºC (after 24hrs) |
Food and beverage, cosmetics and personal care, home goods, and medicines are just a few of the industries that use Bopp stickers. They are employed for labeling, branding, and security purposes. Bopp stickers are perfect for uses requiring strong adhesive qualities, good clarity, and critical resistance to moisture and chemicals.
No, Bopp stickers are designed to be permanently attached to the surface they are applied to and are not designed to be easily removed. They bond strongly to the surface and require a solvent-based cleaner or adhesive remover to remove them, which can damage the surface.
Shelf life
12 months, applicable only to the material delivered by label stock manufacturer Jinya which has not undergone further processing, under the following STORAGE CONDITIONS:
This bopp sticker material must be stored at a temperature of 23±2ºC and 50±5% of Relative Humidity.
Storage area must be dry and clean.
Keep the material in the original packaging when not used in order to protect it from dust and contamination.
Do not expose to direct sunlight or heat sources.