Direct Thermal Label DFA7059

Name: Direct Thermal Label DFA7059
Brand: Jinya New Materials Co.,Ltd

DFA7059 Thermal Printed Labels are intended for usage in industrial settings. When printed using industrial printers, these labels produce high-quality, long-lasting labels since they are made of specialty-grade materials.

Get Label Roll Price

Specification of Direct Thermal Label DFA7059

	weight	thickness	material
Face Material	70±10%g/m² ISO 536	0.075±10%mm ISO 534	TOP Thermal paper with protective coating resistance to water, plastic，grease，scratch
Liner	58±10%g/m² ISO 536	0.055±10%mm ISO 534	yellow glassine treated with super calender
Adhesive	This is an adhesive with a high initial viscosity. It has excellent adhesion performance on non-polar surfaces.This is an adhesive with a high initial viscosity, which can be used for indirect to food, direct contact labeling of advertising stickers and cosmetics.
Peel adhesion	Initial adhesion 14N/25mm FTM 9 st.st	20 minutes Peel adhesion value on steel at 180° 16N/25mm or tear off FTM 1 st.st	20 minutes Peel adhesion value on steel at 90° 8N/25mm or tear off FTM 2 st.st
Temperature	Min. Appl. Temp. 10 ºC	Service Temp. -15ºC+65ºC (after 24hrs)

Applications of Direct Thermal Label DFA7059

The thermal sensitivity of this thermal product is suitable for electronic scale printing. It is recommended to test it before use to avoid any long-term exposure to an environment above 50°C or direct sunlight to protect product quality. The product is suitable for the occasions that are currently sold and discounted. Not recommended for use in preloaded environments. It is not suitable for immersion in water or stored in a humid environment. After the label is printed, it cannot be placed in a place that is easily contaminated with animal and vegetable oils or chemicals, so as to avoid the barcode being unscannable.

The above suggestion, application, and elaboration are not intended as the guarantee of Jinya. All sales of Jinya products shall be tested by customer in the final environment to confirm compliance with the requirements of the use of environment.

Printing Methods of Direct Thermal Label DFA7059

It can be used for many traditional printing. Processing environments above 50°C have to be avoided due to the thermal nature of the product. The ink containing alcohol or volatile organic solvent may damage the thermal layer. Advise to use the original ink without any additives for processing and printing as much as possible. For spot color inks or inks with additives, please test ink before printing.

Shelf life

12 months, applicable only to the material delivered by Jinya which has not undergone further processing, under the following STORAGE CONDITIONS:

This material must be stored at a temperature of 23±2ºC and 50±5% of Relative Humidity.
Storage area must be dry and clean.
Keep the material in the original packaging when not used in order to protect it from dust and contamination.
Do not expose to direct sunlight or heat sources.

Your Trusted Partner in ADHESIVE LABEL Solution

Provide you with high quality and cost-effective custom labels

Contact



Email:
info@jinyalabel.com



Phone:
+86-18516719968



Address:
Room 606, Block B No 18, Fangsi Road, Songjiang District, Shanghai

Related Direct Thermal Label

Direct Thermal Tags DBB6540

Thermal Printed Labels DBA6557

Direct Thermal Label ECA6558

Direct Thermal Label DCA6858