It provides a unique labeling approach that satisfies many requirements across several industry sectors. They provide an efficient, cost-effective labeling solution that can be customized to fit any application.
weight | thickness | material | |
Face Material | 65g / m² ± 10% ISO536 | 0.045mm ± 10% ISO534 | Gloss white polyester film |
Liner | 58g / m² ± 10% ISO536 | 0.05mm ± 10% ISO534 | white glassine paper with super calender treatment |
Adhesive | ORD is a removable adhesive. It has proper initial viscosity and high resilience. It has good finalremovability and viscosity. It can be torn and pasted on many non-paper stickers without leaving residual glue. The normal use range is wide. | ||
Peel adhesion | initial adhesion 7 N/25mm or tear off FTM9 | 20 mins Peel adhesion value on steel at 180 angle 8 N/25mm or tear off FTM1 | 20 mins Peel adhesion value on steel at 90 angle 5.5N/25mm or tear off FTM2 |
Temperature | Min. Appl. Temp. 0 ºC | Service Temp. -30ºC +80ºC (24H after labeling) |
The product has excellent tear resistance, dimensional stability and chemical corrosion resistance, and is suitable for making various durability labels.
The above suggestion, application, and elaboration are not intended as the guarantee of Jinya. All sales of Jinya products shall be tested by customer in the final environment to confirm compliance with the requirements of the use of environment.
After special coating treatment, the surface can meet various printing methods without special ink treatment. Suitable for carbon tape printing. It is recommended to use high hardness tools for die cutting, and colleagues should avoid label overflow due to excessive winding tension。
Shelf life
12 months, applicable only to the material delivered by Jinya which has not undergone further processing, under the following STORAGE CONDITIONS:
This material must be stored at a temperature of 23±2ºC and 50±5% of Relative Humidity.
Storage area must be dry and clean.
Keep the material in the original packaging when not used in order to protect it from dust and contamination.
Do not expose to direct sunlight or heat sources.