WBA7059 is a full-size sticker paper used for different applications, including product labeling, inventory management, and shipping. The superior stickiness, superior printing quality, and extreme durability of these stickers guarantee peak performance.
weight | thickness | material | |
Face Material | 70±10%g/m2 ISO 536 | 0.07±10%mm ISO 534 | Uncoated white matte paper |
Liner | 58±10%g/m2 ISO 536 | 0.053±10%mm ISO 534 | Super calendered yellow glassine backing |
Adhesive | A general permanent rubber adhesive. HM is an adhesive with a high initial viscosity. High-viscosity, permanent rubber-based adhesive, a high-quality hot-melt adhesive suitable for a variety of substrates, with extremely high initial tack and final tack, meeting the needs of applications that require high tack. | ||
Peel adhesion | initial adhesion 10 N/25mm FTM 9 st.st | 20 minutes Peel adhesion value on steel at 180 angle 16N/25mm FTM 1 st.st | 20 minutes Peel adhesion value on steel at 90 angle 8 N/25mm FTM 2 st.st |
Temperature | Min. Appl. Temp. 8 ºC | Service Temp. -5ºC±65ºC (24H after labeling) |
Yes, full-size uncoated sticker paper can be written on with a permanent marker or a ballpoint pen. However, it is best to test the writing instrument on a small area of the sticker paper before writing on the entire surface to ensure that it adheres properly and is not smudged or erased.
Full-size sticker paper should be stored in a cool, dry place, away from direct sunlight and moisture. It is recommended to store it in its original packaging until ready to use. Storing full-size sticker paper properly will help to maintain its quality and ensure that it remains in good condition until it is ready to be used.
Shelf life
12 months, applicable only to the material delivered by Jinya which has not undergone further processing, under the following STORAGE CONDITIONS:
This material must be stored at a temperature of 23±2ºC and 50±5% of Relative Humidity.
Storage area must be dry and clean.
Keep the material in the original packaging when not used in order to protect it from dust and contamination.
Do not expose to direct sunlight or heat sources.