They can be printed using several printing technologies such as flexographic, digital, and offset printing.
weight | thickness | material | |
Face Material | 70g / m² ± 10% ISO536 | 0.072mm ± 10% ISO534 | Smooth bright white paper with thermal sensitive coating, with waterproof, oil-resistant and plastic-resistant effec |
Liner | 58g / m² ± 10% ISO536 | 0.05mm ± 10% ISO534 | white glassine paper with super calender treatment |
Adhesive | ORD is a removable adhesive. It has proper initial viscosity and high resilience. It has good final removability and viscosity. It can be torn and pasted on many non-paper stickers without leaving residual glue. The normal use range is wide. | ||
Peel adhesion | initial adhesion 7 N/25mm or tear off FTM9 | 20 mins Peel adhesion value on steel at 180 angle 8 N/25mm or tear off FTM1 | 20 mins Peel adhesion value on steel at 90 angle 5.5N/25mm or tear off FTM2 |
Temperature | Min. Appl. Temp. 0 ºC | Service Temp. -30ºC +80ºC (24H after labeling) |
It can be used for most traditional printing methods. Due to the thermal sensitivity of the product, the processing environment above 50 ° C should be avoided. Ink containing alcohol or volatile organic solvent may damage the thermosensitive layer. It is recommended to use raw ink without any additives as far as possible for processing and printing. Spot color inks or inks with additives are recommended to be tested before printing.
It can be used for most traditional printing methods. Due to the thermal sensitivity of the product, the processing environment above 50 ° C should be avoided. Ink containing alcohol or volatile organic solvent may damage the thermosensitive layer. It is recommended to use raw ink without any additives as far as possible for processing and printing. Spot color inks or inks with additives are recommended to be tested before printing.
Shelf life
12 months, applicable only to the material delivered by Jinya which has not undergone further processing, under the following STORAGE CONDITIONS:
This material must be stored at a temperature of 23±2ºC and 50±5% of Relative Humidity.
Storage area must be dry and clean.
Keep the material in the original packaging when not used in order to protect it from dust and contamination.
Do not expose to direct sunlight or heat sources.