Thermal Printed Labels DBA6557

Name: Thermal Printed Labels DBA6557
Brand: Jinya New Materials Co.,Ltd

DBA6557 Thermal Printed Labels are intended for usage in industrial settings. When printed using industrial printers, these labels produce high-quality, long-lasting labels since they are made of specialty-grade materials.

Get Label Roll Price

Specification of Thermal Printed Labels DBA6557

	weight	thickness	material
Face Material	70±10%g/m² ISO 536	0.075±10%mm ISO 534	Smooth, bright white paper with thermal protective coating resistance to water, oil, scratch and plasticizer
Liner	58±10%g/m² ISO 536	0.053±10%mm ISO 534	White glassine treated with super calender
Adhesive	Rubber based permanent adhesive. This is an adhesive with a medium initial viscosity. It has excellent adhesion performance on non-polar surfaces; and has a certain degree of softness, which can be used for indirect to food, direct contact labeling of advertising stickers and cosmetics.
Peel adhesion	Initial adhesion 10N/25mm FTM 9 st.st	20 minutes Peel adhesion value on steel at 180° 16N/25mm or tear off FTM 1 st.st	20 minutes Peel adhesion value on steel at 90° 8N/25mm or tear off FTM 2 st.st
Temperature	Min. Appl. Temp. 8 ºC	Service Temp. -5ºC+60ºC (after 24hrs)

Applications of Thermal Printed Labels DBA6557

This thermal product is suitable for barcode printer. It is recommended to test it before using and avoid any long-term exposure to an environment above 50°C or direct sunlight,which to protect the quality of the product. Although the label has a certain ability to resist moisture, but not recommended to be used in water immersion or stored in a humid environment for a long time. After the label is printed, it should not be placed in a place that is easily contaminated with animal and vegetable oils or chemical substances, so as to prevent the barcode from being unscannable.

The above suggestion, application, and elaboration are not intended as the guarantee of Jinya. All sales of Jinya products shall be tested by customer in the final environment to confirm compliance with the requirements of the use of environment.

Printing Methods of Thermal Printed Labels DBA6557

It can be used for most traditional printing, due to the thermal nature of the product, processing environments above 50°C should be avoided. The ink containing alcohol or volatile organic solvent may damage the thermal layer. It is recommended to use the original ink without any additives for processing and printing as much as possible. For spot color inks or inks with additives, it is recommended to test the inks before printing.

Shelf life

12 months, applicable only to the material delivered by Jinya which has not undergone further processing, under the following STORAGE CONDITIONS:

This material must be stored at a temperature of 23±2ºC and 50±5% of Relative Humidity.
Storage area must be dry and clean.
Keep the material in the original packaging when not used in order to protect it from dust and contamination.
Do not expose to direct sunlight or heat sources.

Your Trusted Partner in ADHESIVE LABEL Solution

Provide you with high quality and cost-effective custom labels

Contact



Email:
info@jinyalabel.com



Phone:
+86-18516719968



Address:
Room 606, Block B No 18, Fangsi Road, Songjiang District, Shanghai

Related Direct Thermal Label

Direct Thermal Tags DBB6540

Clear Direct Thermal Labels DDB6840

Thermal Labels DBA6559

Direct Thermal Label ECA6557