Reseal labels are an essential development in the packaging industry, combining innovation and practicality to address various concerns related to product freshness, safety, and convenience.
weight | thickness | material | |
Face Material | 46g / m² ± 10% ISO536 | 0.05mm ± 10% ISO534 | Biaxially stretched transparent polypropylene film with special coating on the surface |
Liner | 80g / m² ± 10% ISO536 | 0.065m ± 10% ISO534 | white glassine paper with super calender treatment |
Adhesive | AD is a removable adhesive, This is a transparent medium and high viscosity wet tissue adhesive. Good chemical resistance and UV resistance, suitable for large packaging and high humidity applications. It can be used for non-direct contact labeling of cosmetics and other products. | ||
Peel adhesion | initial adhesion 6 N/25mm or tear off FTM9 | 20 mins Peel adhesion value on steel at 180 angle 3 N/25mm or tear off FTM1 | 20 mins Peel adhesion value on steel at 90 angle 2N/25mm or tear off FTM2 |
Temperature | Min. Appl. Temp. 5 ºC | Service Temp. -20ºC +60ºC (24H after labeling) |
The material has certain tearing and chemical corrosion resistance, moderate temperature resistance, stable physical and chemical properties, good transparency, and a certain barrier property. It has the removable property of repeated pasting on many objects to be pasted. It is widely used to make tissue bag sealing stickers and wet tissue paper sealing stickers. Due to the different surface properties of the objects to be pasted, it is recommended to conduct label pasting test on the objects to be put into use.
The above suggestion, application, and elaboration are not intended as the guarantee of Jinya. All sales of Jinya products shall be tested by customer in the final environment to confirm compliance with the requirements of the use of environment.
Biaxially stretched, strong polypropylene film has good die-cutting and overprinting performance and high tear resistance. The surface has a layer of transparent coating. Avoid material deformation caused by overheating. It can be used for flexographic printing, letterpress printing, screen printing and other printing methods, and has good performance on ink. Product labels with important properties such as water resistance, oil resistance and chemicals.
Shelf life
12 months, applicable only to the material delivered by Jinya which has not undergone further processing, under the following STORAGE CONDITIONS:
This material must be stored at a temperature of 23±2ºC and 50±5% of Relative Humidity.
Storage area must be dry and clean.
Keep the material in the original packaging when not used in order to protect it from dust and contamination.
Do not expose to direct sunlight or heat sources.