The Wine Label YAA1057 is a high-quality label designed specifically for wine bottles. It is made of durable and water-resistant materials and is suitable for a range of printing methods.
weight | thickness | material | |
Face Material | 100g/m²±10% ISO 536 | 120μ±10% ISO 534 | Glossy white athens texture paper |
Liner | 60g/m²±10% ISO 536 | 53μ±10% ISO 534 | Super calendered semi-gloss white glassine liner |
Adhesive | HM is a permanent, rubber-based adhesive.This is an adhesive with a medium initial viscosity. It has excellent adhesion performance on non-polar surfaces; and has a certain degree of softness, which can be used for indirect to food, direct contact labeling of advertising stickers and cosmetics. | ||
Peel adhesion | initial adhesion 13N/25mm FTM9 st.st | 20 minutes Peel adhesion value on steel at 90 angle 10 N/25mm FTM 2 st.st | 24 hours Released forced value on steel at 90 angle 11 N/25mm FTM 2 st.st |
Temperature | Min. Appl. Temp. 8ºC | Service Temp. -5ºC to 60ºC (24H after labeling) |
Typically it is used to make label on red wine, food, etc.
The above suggestion, application, and elaboration are not intended as the guarantee of Jinya. All sales of Jinya products shall be tested by customer in the final environment to confirm compliance with the requirements of the use of environment.
Avoid material deformation caused by overheating. It can be applied to various printing methods such as flexographic printing, letterpress printing and screen printing, and has good expressiveness to ink.
Shelf life
12 months, applicable only to the material delivered by Jinya which has not undergone further processing, under the following STORAGE CONDITIONS:
This material must be stored at a temperature of 23±2ºC and 50±5% of Relative Humidity.
Storage area must be dry and clean.
Keep the material in the original packaging when not used in order to protect it from dust and contamination.
Do not expose to direct sunlight or heat sources.