Product labeling, packaging, and home décor are just a few uses for the metallic sticker paper GGE1044. This paper is extremely strong, produces printing that is of a very high caliber, and has a distinctive metallic sheen. The PET substance used for the sticker back increases the overall toughness of the metallic sticker paper.
weight | thickness | material | |
Face Material | 80±10%g/m2 ISO 536 | 0.072±10%mm ISO 534 | Gloss silver paper |
Liner | 58±10%g/m2 ISO 536 | 0.055±10%mm ISO 534 | Super calendered double layer white glassine backing |
Adhesive | A general permanent water-based acrylic adhesive. EP is an adhesive with a high initial viscosity. It has excellent performance on many packaging materials. It can be used for non-direct contact labeling of products such as price tags, drug and clothing labels. | ||
Peel adhesion | initial adhesion 10 N/25mm FTM 9 st.st | 20minutes Peel adhesion value on steel at 180 angle 16N/25mm FTM 1 st.st | 20 minutes Peel adhesion value on steel at 90 angle 9 N/25mm FTM 2 st.st |
Temperature | Min. Appl. Temp. 10 ºC | Service Temp. -10ºC±90ºC (24H after labeling) |
Widely used in promotional and industrial semi-gloss color label printing. Typical uses such as clothing tag labels. This product can be attached to the flat surface and typical surface of most substrates, including cardboard and plastic film. This material is not suitable for use on PVC substrates.
The above suggestion, application, and elaboration are not intended as the guarantee of Jinya. All sales of Jinya products shall be tested by customer in the final environment to confirm compliance with the requirements of the use of environment.
No, metallic sticker paper is not designed to be reused, as it loses its adhesive strength after removal. Attempting to reuse metallic sticker paper can cause it to not stick properly, and it can also lose its metallic finish. It is recommended to apply metallic sticker paper only once for optimal results.
Shelf life
12 months, applicable only to the material delivered by Jinya which has not undergone further processing, under the following STORAGE CONDITIONS:
This material must be stored at a temperature of 23±2ºC and 50±5% of Relative Humidity.
Storage area must be dry and clean.
Keep the material in the original packaging when not used in order to protect it from dust and contamination.
Do not expose to direct sunlight or heat sources.